Occupant safety
57
on and off in the on-board computer
(Y page 209).
Belt warning for driver and front
passenger
Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the7 seat belt warning lamp
lights up for six seconds each time the engine
is started. It then goes out once the driver and
the front passenger have fastened their seat
belts.
Seat belt outlet height adjustment
You can adjust the seat belt height on the
driver's seat and the front-passenger seat.
If the driver's seat belt is not fastened after
the engine is started, an additional warning
tone will sound. The warning tone goes out
after approximately six seconds or once the
driver's seat belt is fastened.
If after six seconds the driver or front-
passenger have not fastened their seat belts
and the doors are closed:
Adjust the belt to a height that allows the
upper part of the seat belt to be routed across
the center of your shoulder.
Rthe7 seat belt warning lamp remains
illuminated as long as either the driver's or
front-passenger seat belt is not fastened.
X To raise: slide the belt sash guide upwards.
The belt sash guide engages in various
positions.
X To lower: press and hold belt sash guide
release:.
X Slide the belt sash guide downwards.
X Release belt sash guide release: and
make sure that the belt sash guide has
engaged.
Rif the vehicle speed once exceeds 15 mph
(25
km/h), the7 seat belt warning
lamp lights up. Additionally, a warning tone
will sound with increasing intensity for a
maximum of 60 seconds or until the
driver's and front-passenger seat belt are
fastened.
If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
7
seat belt warning lamp lights up and a
warning tone sounds again.
Releasing seat belts
The warning tone ceases even if the driver or
front passenger have still not fastened their
seat belt after 60 seconds. The7 seat belt
warning lamp stops flashing but continues to
be illuminated.
After the vehicle has come to a standstill, the
warning tone is reactivated and the7 seat
belt warning lamp flashes again if the vehicle
speed has exceeded 15 mph (25 km/h).
X Press release button? (Y page 55) and
guide belt tongue; back towards belt
sash guide:.
!
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Consult an authorized Mercedes-
Benz Center.
The7 seat belt warning lamp only goes
out if:
Rboth the driver and the front passenger
have fastened their seat belts
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)