Reset the liftgate’s opening height
Disable rear window switches
You can change the height of
the powered liftgate to make
it easier to reach:
To prevent children sitting in
the rear seats from opening
the windows, disable the
rear switches by pressing
the button shown. When
disabled, the button’s light
turns on. The windows can
still be operated using the
switches on the driver’s
door.
•
Open the liftgate, then
lower it to the desired
opening height.
•
Press and hold the button
on the underside of the
liftgate for 2 seconds until
you hear a confirmation
beep.
Sunroof
•
Confirm that you’ve set it to the desired height by closing the liftgate,
then reopening it.
To operate the sunroof, touch CONTROLS > SUNROOF on
the touchscreen. Drag or tap on the sunroof’s slider bar, or
touch the image of the sunroof. The sunroof moves to the
selected position.
WINDOW CONTROLS
Press down on a switch
to lower the associated
window all the way down.
Window switches operate
at two levels. To lower
a window partially, hold
the switch and release
when the window is at the
desired position.
If the sunroof’s safety mechanism
detects any type of obstruction, it
won’t close. If, after removing the
obstruction, it still doesn’t close,
touch and hold down CLOSE.
Touch VENT to open the sunroof
slightly.
Drag the slider bar to the indents
to open the sunroof to the comfort
position (80% open). At this position,
wind noise is minimal.You can also
move the sunroof to the comfort
position by touching OPEN once.
Pull a switch up to raise
the associated window.
This also operates at two
levels, as described above.
Touch once to open the sunroof to
the comfort position. Touch twice to
open it fully.
Touch anywhere on the sunroof image to stop it from moving at any time.
11
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Quick Reference Guide |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)