Auto down window (if equipped) To reset the power windows
Automatic reversal (if equipped)
Pressing the power window switch If the power windows do not operate
momentarily to the second detent normally, the automatic power win-
position (6) completely lowers the dow system must be reset as follows:
window even when the switch is
1.
Place the POWER button to the
ON position.
released. To stop the window at the
desired position while the window is
in operation, pull up or press down
and release the switch.
2.
Close the window and continue
pulling up on the power window
switch for at least one second.
3
If the power windows do not operate
properly after resetting, it is recom-
mended that the system be checked
Auto up/down window
(if equipped)
Pressing or pulling up the power win- by an authorized HYUNDAI dealer.
dow switch momentarily to the sec-
ond detent position (6) completely
lowers or lifts the window even when
the switch is released. To stop the
window at the desired position while
the window is in operation, pull up or
press down and release the switch.
OLF044032
If a window senses any obstacle
while it is closing automatically, it will
stop and lower approximately 30 cm
(12 inches) to allow the object to be
cleared.
If the window detects the resistance
while the power window switch is
pulled up continuously, the window
will stop upward movement then
lower approximately 2.5 cm (1 inch).
If the power window switch is pulled
up continuously again within 5 sec-
onds after the window is lowered by
the automatic window reversal fea-
ture, the automatic window reversal
will not operate.
3-25
| Categories | Hyundai Manuals, Hyundai Ioniq Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Ioniq |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)