What to do in an emergency
Jump starting procedure
7. Connect the other end of the sec-
ond jumper cable to the black,
negative (-) chassis ground of
your vehicle (4).
1.
2.
3.
Position the vehicles close enough
that the jumper cables will reach,
but do not allow the vehicles to
touch.
Do not allow the jumper cables to
contact anything except the cor-
rect battery or jumper terminals or
the correct ground. Do not lean
over the battery when making
connections.
Avoid fans or any moving parts in
the motor compartment at all
times, even when the vehicles are
turned off.
Turn off all electrical devices such
as radios, lights, air conditioning,
etc. Put the vehicles in P (Park)
and set the parking brakes. Turn
both vehicles OFF.
8.
Start the engine of the assisting
vehicle and let it run at approxi-
mately 2,000 rpm for a few min-
utes. Then start your vehicle.
1
VQA4001
4.
Connect the jumper cables in the
exact sequence shown in the illus-
tration. First connect one jumper
cable to the red, positive (+)
jumper terminal of your vehicle
(1).
If your vehicle will not start after a
few attempts, it probably requires
servicing. In this event please seek
qualified assistance. If the cause of
5.
6.
Connect the other end of the your battery discharging is not
jumper cable to the red, positive apparent, have your vehicle checked
(+)
battery/jumper terminal of the by an authorized HYUNDAI dealer.
assisting vehicle (2).
Connect the second jumper cable
to the black, negative (-) battery/
chassis ground of the assisting
vehicle (3).
6-6
| Categories | Hyundai Manuals, Hyundai Ioniq Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Ioniq |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)