4.
Adjust the tire inflation pressure to
the recommended tire inflation.
CAUTION
With the POWER button ON, pro-
ceed as follows.
When you use theTire Mobility Kit
including sealant not approved by
HYUNDAI, the tire pressure sen-
sors may be damaged by sealant.
The sealant on the tire pressure
sensor and wheel should be
removed when you replace the
tire with a new one and inspect
the tire pressure sensors at an
authorized dealer.
-
To increase the inflation pres-
sure:
Switch on the compressor, posi-
tion to "I". To check the current
inflation pressure setting, briefly
switch off the compressor.
-
To reduce the inflation pres-
sure:
OAEE066005
Checking the tire inflation pressure
Press the button (8) on the com-
pressor.
1.
2.
3.
After driving approximately 7~10 km
(4~6 miles or about 10 minutes),
stop at a safe location.
i
Information
6
Connect the filling hose (2) of the
compressor directly to the tire The pressure gauge may show higher
valve.
than actual reading when the com-
pressor is running. To get an accurate
tire pressure, the compressor needs to
be turned off.
Plug the compressor power cord
into the vehicle power outlet.
6-21
| Categories | Hyundai Manuals, Hyundai Ioniq Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Ioniq |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)