4.
5.
Check the removed fuse; replace it Multi fuse
if it is blown. To remove or insert
the fuse, use the fuse puller in the
motor compartment fuse panel.
Fuse/relay panel description
Instrument panel fuse panel
Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized HYUNDAI dealer.
NOTICE
After checking the fuse panel in
the motor compartment, securely
install the fuse panel cover. You
may hear a clicking sound if the
OAEE076013
If the multi fuse is blown, it must be
OAEE076014
cover is securely latched. If it is removed as follows:
Inside the fuse/relay box cover, you
can find the fuse/relay label describ-
ing fuse/relay name and capacity.
not securely latched, electrical
failure may occur from water con-
tact.
1.
2.
Turn the vehicle off.
Disconnect the negative battery
cable.
3.
4.
5.
6.
Remove the fuse panel cover by
pressing the tab and pulling it up.
i
Information
7
Remove the nuts shown in the pic- Not all fuse panel descriptions in this
ture above.
manual may be applicable to your
Replace the fuse with a new one vehicle; the information is accurate at
of the same rating.
the time of printing. When you inspect
Reinstall in the reverse order of the fuse box on your vehicle, refer to
removal.
the fuse box label.
i
Information
If the multi fuse is blown, consult an
authorized HYUNDAI dealer.
7-45
| Categories | Hyundai Manuals, Hyundai Ioniq Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Ioniq |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)