What to do in an emergency
Distributing the sealant
CAUTION
Do not attempt to drive your
vehicle if the tire pressure is
below 200 kpa (29 psi). This
could result in an accident due
to sudden tire failure.
9.
Switch off the compressor.
10.
Detach the hoses from the
sealant bottle connector and
from the tire valve.
OAEE066008
7.
8.
Plug the compressor power cord
(3) into the vehicle power outlet.
OLMF064106
Return the Tire Mobility Kit to its stor-
11.
Immediately drive approximately
km (4~6 miles or about 10
minutes) to evenly distribute the
sealant in the tire.
Do not exceed a speed of 80 km/h
mph). If possible, do not fall
With the POWER button in the ON age location in the vehicle.
position, switch on the compres-
sor and let it run for approximately
7~10
5~7
minutes to fill the sealant up
to proper pressure. (Refer to the
Tire and Wheels, chapter 8). The
inflation pressure of the tire after
filling is unimportant and will be
checked/corrected later.
(50
below a speed of 20 km/h (12 mph).
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull
off of the side of the road.
Be careful not to overinflate the
tire and stay away from the tire
when filling it.
Call for road side service or towing.
When you use the Tire Mobility Kit,
the tire pressure sensors and wheel
may be damaged by sealant, have it
inspected at an authorized dealer.
6-20
Product Specification
Categories | Hyundai Manuals, Hyundai Ioniq Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Ioniq |
Document File Type | |
Copyright | Attribution Non-commercial |