Driving your vehicle
If any of these conditions occur, the
light on the BSD switch and the sys-
tem will turn off automatically.
RCTA (Rear Cross Traffic
Alert) (if equipped)
The Rear Cross Traffic Alert feature
monitors approaching cross traffic
from the left and right side of the
vehicle when your vehicle is in
reverse.
When the BSD canceled warning
message is displayed in the cluster,
check to make sure that the rear
bumper is free from any dirt or snow
in the areas where the sensor is
located. Remove any dirt, snow, or
foreign material that could interfere
with the radar sensors.
Operating conditions
To operate:
After any dirt or debris is removed,
OTLE055040
Go to the 'User Settings → Driving
Assist and select Rear Cross Traffic
Alert' on the LCD display.
the BSD system should operate nor- Check BSD system
mally after about 10 minutes of driv-
ing the vehicle.
If there is a problem with the BSD
system, a warning message will
If the system still does not operate appear and the light on the switch
normally have your vehicle inspected will turn off. The system will turn off
The system will turn on and standby
to activate. The system will activate
when vehicle speed is below 10 km/h
(6.2 mph) and with the gear in R
(Reverse).
by an authorized HYUNDAI dealer.
automatically. We recommend that
you have your vehicle inspected by
an authorized HYUNDAI dealer.
5-44
Product Specification
Categories | Hyundai Manuals, Hyundai Ioniq Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Ioniq |
Document File Type | |
Copyright | Attribution Non-commercial |