6
DO-IT-YOURSELF MAINTENANCE
CHECKING BRAKE PEDAL
CLEARANCE
CHECKING DRIVE BELTS
24
G180A01A-GAT
G190A01A-GAT
2.7L
Power steering
1.6L
Water Pump Pulley
Auto tensioner
5.1~6 mm
(0.2~0.24
in.)
45.1
mm (1.78 in.)
A/C
comp.
Alternator
Pulley
Generator
Crankshaft pulley
G190A02B
Pulley Crankshaft Pulley
HTB186
G180A01L
Drive belts should be checked peri-
odically for proper tension and ad-
justed if necessary. At the same time,
belts should be examined for cracks,
wear, fraying or other evidence of
deterioration and replaced if neces-
sary.
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and
then hold it down with a force of about
2
.0L
Power
steering
A/C
comp.
Water pump
pulley
490N
(50 kg, 110 lbs). The brake
pedal clearance is the distance from
the top surface of the brake pedal to
the asphalt sheeting under the floor
mat. If the brake pedal clearance is
not within the limits specified in the
illustration, have it inspected by your
Hyundai dealer and adjusted or re-
paired if necessary.
Belt routing should also be checked
to be sure there is no interference
between the belts and other parts of
the engine. After a belt is replaced,
the new belt should be adjusted again
after two or three weeks to eliminate
slack resulting from initial stretching
after use.
Generator
Tension
pulley
Crankshaft pulley
G190A01GK
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)