OWNERMAINTENANCE
6
29
1
. Keep all tyres inflated to the cor-
rect pressure.
Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
vehicle at a distance of 118.1 in.
G290B01GK-EAT
Adjustment After Headlight As-
sembly Replacement
SPECIFICATION:
"H"
Horizontal centre line of headlights
from ground:
Low Beam: 26.7 in. (679mm)
High Beam: 26.5 in. (672mm)
2.
Vertical line
Horizontal line
W
"P"
(3m)
from the test wall.
3.
4.
See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tyres,
jack, and tools).
Clean the head lights lens and turn
on the headlight.
Open the bonnet.
Draw the vertical line (through the
centre of each headlight beam pat-
tern) and the horizontal line (through
the centre of each headlight beam
pattern) on the aiming screen.
And then, draw a parallel line at
"W"
Distance between each headlight cen-
tre : Low
Beam: 47.3 in. (1,202mm)
High Beam: 38.0 in. (966mm)
1.18
in.
Cut-off line
H
L
Ground
line
H
5.
6.
"L"
G290B01JM-D
Distance between the headlights and
the wall that the lights are tested
against : 118.11 in. (3,000 mm)
If the vehicle has had front body
repair and the headlight assembly
has been replaced, the headlight aim-
ing should be checked using an aim-
ing screen as shown in the illustra-
tion. Turn on the headlight switch.
1. Adjust headlights so that main axis
of light is parallel to centre line of
the body and is aligned with point
"P" shown in the illustration.
1.18 in. (30 mm) under the hori-
zontal line.
7
8
. Adjust each cut-off line of the low
beam to the parallel line with a
phillips screwdriver - VERTICAL
AIMING.
. Adjust each cut-off line of the low
beam to the each vertical line with
a phillips screwdriver - HORIZON-
TAL AIMING.
2. Dotted lines in the illustration show
centre of headlights.
gkfluk-6.p65
29
11/21/2005, 3:01 PM
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)