6
DO-IT-YOURSELF MAINTENANCE
HEADLIGHT AIMING AD-
JUSTMENT
30
G240A01A-AAT
POWER STEERING HOSES
G290A02GK-GAT
1. Keep all tires inflated to the correct
pressure.
Low Beam
Vertical
aiming
2.
Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
vehicle at a distance of 3m (118
in.) from the test wall.
It is suggested that you check the
power steering hose connections for
fluid leakage daily. The power steer-
ing hoses should be replaced if there
is severe surface cracking, pulling,
scuffing or worn spots. Deterioration
of the hose could cause premature
failure.
3.
4.
See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tire,
jack, and tools).
Clean the head light lenses and
turn on the headlights.
5. Open the hood.
Horizontal
aiming
G290A01GK
High Beam
Horizontal
aiming
6. Draw the vertical line (through the
center of each headlight beam pat-
tern) and the horizontal line (through
the center of each headlight beam
pattern) on the aiming screen.
And then, draw a parallel line at 30
mm (1.18 in.) under the horizontal
line.
7.
Adjust each cut-off line of the low
beam to the parallel line with a
phillips screwdriver - VERTICAL
AIMING.
Adjust each cut-off line of the low
beam to each vertical line with a
phillips screwdriver - HORIZON-
TAL AIMING.
Vertical aiming
G290A02GK
Before performing aiming adjustment,
make sure of the following.
8.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)