OWNERMAINTENANCE
6
9
3.
Prepare a suitable receptacle to
collect the displaced oil and re-
move the drain plug from the sump.
6. Install a new oil filter having
smeared the sealing ring with clean
oil and rotating clockwise until the
filter contacts the mounting and
then a further one half turn. Do not
over-tighten.
!
WARNING:
Prolonged and repeated contact
with used engine oils may result in
serious skin disorders including
dermatitis and cancer. Avoid con-
tact with skin as far as possible
and always wash thoroughly after
any contact. Keep used oils out of
reach of children. It is illegal to
pollute drains, water courses and
soil. Use only authorized waste
collection facilities including civic
amenity sites and garages for the
disposal of used oil and oil filters.
If in doubt, contact the local au-
thority for disposal instructions.
!
WARNING:
The oil being drained from the
engine will be hot. Care should be
exercised to prevent scalding.
Tightening torque: 1.2 ~ 1.6
kgf.m
7.
8.
Remove the engine oil level dip-
stick.
4.
When the oil has drained from the
sump, replace the drain plug using
a new gasket ensuring that the
plug is not over tightened.
Pour the specified quantity of the
recom-mended oil into the engine
and replace the filler cap. Start the
engine and ensure that no oil leaks
exist. Turn off the engine and after
a couple minutes, recheck the oil
level.
Tightening torque:
4.5
4.5
~ 4.0 kgf.m (1.6/2.0L)
~ 3.5 kgf.m (2.7L)
5.
Remove the oil filter by rotating
counterclock-wise, using a propri-
etary oil filter removal tool if neces-
sary. Note that the oil filter will
contain approximately 0.5 litres of
oil and this should be collected in a
suitable receptacle.
gkfluk-6.p65
9
11/21/2005, 3:00 PM
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)