DO-IT-YOURSELFMAINTENANCE
6
11
Turn the engine off and place the
gear selector lever in "P" (auto-
matic) or reverse gear (manual
transaxle).
Open the hood and remove the
engine oil level dipstick.
4. Remove the engine oil filler cap.
8. After mounting a new centerpipe
O-ring, new oil filter element and
new O-ring to upper cap, install
the upper cap to oil filter housing
and retighten by turning it clock-
wise. Do not over-tighten.
5.
Slide underneath the car and
loosen the oil pan drain plug by
turning it counterclockwise oil pan
with a wrench of the proper size.
Be sure that a drain pan is in
position to catch the oil as it drains
out, then remove the drain plug.
2.
Tightening torque : 2.5 kgf.m
Upper cap
!
O-ring
!
WARNING:
CAUTION:
Don't use old oil filter upper cap
O-ring and centerpipe O-ring
Oil filter
element
Be very careful when draining the
engine oil as it may be hot enough
to burn you!
Centerpipe
O-ring
9.
Refill the crankcase with the rec-
ommended engine oil. Refer to
the specification in chapter 9 for
engine oil capacity.
Oil filter
housing
G040B02FC
6. When the oil has stopped drain-
ing, replace the drain plug using a
new gasket and retighten by turn-
ing it clockwise.
3.
Loosen the oil filter upper cap with
a proper tool from the oil filter
housing until an O-ring is seen.
Then, drain the oil completely.
Oil pan drain plug tightening
torque : 3.5 ~ 4.5 kgf.m
!
CAUTION:
Slowly pour the recommended oil
by using a funnel. Do not overfill
not to damage the engine.
7.
Pull out the oil filter upper cap with
element from the oil filter housing.
Using a clean cloth, remove any
dirt or oil accumulated around the
oil filter housing.
!
CAUTION:
Slowly loosen the oil filter upper
cap not to overflow the oil.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)