IN CASE OF EMERGENCY
SD030A2-E
Jump Starting
with copious amounts of water and medi-
cal assistance sought.
CAUTION:
If the jump cable are incorrectly installed,
damage to the vehicle electrical system
may occur, in particular the electronic
components such as the Fuel Injection
system computer and the Automatic
1
. Ensure that the booster battery is 12 volt
type. If the booster battery is installed in
another vehicle, ensure that the two vehi-
cles are not touching.
Transaxle
computer. The battery must
2
. Turn off all unnecessary electrical equip-
ment in both vehicles.
Ensure that the engine of the vehicle pro-
viding the jump start is running prior to
connection of the jump cables.
Connect the red jump cable to the positive
(+) terminal of the booster battery and the
other end to the positive (+) terminal of the
discharged battery.
never be disconnected whilst the engine
is running.
Discharged
battery
3.
SD040A2-E
IF THE ENGINE OVERHEATS
If the temperature gauge indicates overheat-
ing:
4.
Booster battery
HFC4002
CAUTION:
1.
2.
Pull off the road and stop as soon as it is
safe to do so.
Place the gear selector lever in "P" (auto-
matic), or neutral (manual transaxle) and
set the parking brake. If the air condition-
ing is on, turn it off.
Personal injury and damage to the vehicle
may occur if jump starting is not per-
formed correctly. If any doubt exists as to
how this operation should be performed,
seek assistance from qualified personnel.
5. Attach the black jump cable to the nega-
tive (-) terminal of the booster battery, and
the other end to a ground point within the
engine compartment of the vehicle with
the flat battery. Do not connect to the
negative battery terminal of the flat battery
since sparks may be generated with the
subsequent risk of explosion.
3.
If coolant is running out under the car or
steam is coming out from under the bonnet
stop the engine. Do not open the bonnet
until the coolant has stopped running or
the steaming has stopped. If there is no
visible loss of coolant and no steam, leave
the engine running and check to be sure
the engine cooling fan is operating.
If the fan is not running, turn the engine off.
WARNING:
Motor vehicle batteries contain sulphuric
acid and emit hydrogen gas. Protective
clothing should be worn and care exer-
cised to prevent the acid from coming into
contact with skin or clothing and the ve-
hicle. Naked lights should not be permitted
in the vicinity of the battery. Care should
be exercised to prevent sparks occurring
during connection. If acid accidentally
comes into contact with skin or eyes, the
affected area should immediately be flushed
6.
Raise the booster vehicle engine speed to
2,000 r.p.m. and start the engine of the
vehicle with the flat battery.
Switch "ON" the main beam headlamps
before carefully removing the jumper
cables in the reverse order of attachment.
Once the jumper cables have been re-
moved, switch "OFF" the main beam
headlamps.
7.
4. Check to see if the water pump drive belt
is broken. If it is not missing, check to see
that it is tight.
3-2
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)