APPEARANCE CARE
Plastic wheel covers should be cleaned using
a sponge and water. Cast alloy wheels should
be cleaned using a mild soap or neutral deter-
gent. Abrasive compounds must not be used
since in the event of these damaging the lac-
quercoating,oxidizationofthealuminiumwheel
will occur, spoiling the appearance.
ensurethataccidentalspillagesareimmediately
flushed with water.
Do not use abrasive cleaning materials which
may damage the bumpers.
Avoid subjecting the bumpers to high tempera-
tures such as may be encountered in high bake
paintovens.
promote corrosion of the floor pan in addition to
the carpet and under felt beginning to rot.
SE050C1-E
INTERIOR VALETING
The soft trim and carpets should be maintained
withtheregularuseofavacuumcleaner.Heavy
soiling should be removed with a dry cleaning
agent recommended for this purpose following
the instructions of the product manufacturer.
Paint thinner, solvents or other such cleaning
materials should not be used since damage to
the upholstery may result.
Theuseofanatoothbrushwillfacilitatecleaning
between the wheel "spokes".
SE040F1-E
ACCIDENT REPAIRS
SE040B1-E
Intheeventofthebodyworksustainingdamage,
the following points should be noted prior to
repairsbeingundertaken.
STAIN/SPOT REMOVAL
Should tree sap, dead insects or tar prove to be
difficult to remove from the paint film, turpentine
or a proprietary paint cutting compound may be
used. Ensure that the area to be cleaned is not
rubbed intensively to prevent breaking through
the colour coat and exposing the under coat.
If body panels are replaced or repaired, anti
corrosiontreatmentmustbeappliedtotherepair
area.Theproductusedmustbecompatiblewith
those used in manufacture. It is recommended
that repairs are entrusted to a Hyundai
authorised repairer to ensure that replacement
parts used are of the same high quality as those
used in manufacture of the vehicle and that the
correct repair methods and materials will en-
sure adequate levels of corrosion protection
andthecontinuedvalidityoftheAntiPerforation
Warranty.
SE050D1-E
SEAT BELTS
Seat belts should be cleaned only with a mild
soap solution. Strong detergents, solvents or
bleaches may damage the belt webbing and
therefore reduce the effectiveness of the belt.
Belts which display signs of fraying, wear of
cuts should be replaced.
SE040C1-E
POLISHING
The exterior paint work should be polished with
a proprietary wax polish when water no longer
collects in bead form on the paint work. The
instructions of the product manufacturer should
be adhered to.
SE050E1-E
WINDOWS
SE050A1-E
INTERIOR
SE040E1-E
A proprietary glass cleaner should be used to
clean the inside of the windows. However, the
rear heated windshield must only be cleaned
using a light horizontal cleaning action. Care
shouldbeexercisedtoavoidtheuseofabrasive
cleanersorcontactwithitemsofjewellerywhich
may damage the heating elements.
BUMPER MAINTENANCE
During the winter period, it is possible that the
passenger compartment flooring may become
wet from damp footwear or quantities of snow
adhering to footwear. The carpet should not be
allowed to remain in this condition since the
carpetmaybegintocreatemustysmellsandwill
Thespecialmaterialfromwhichthebumpersare
manufacturedwarrantsspecialattentiontopre-
serve the appearance of the bumpers. Avoid
contactwithbatteryelectrolyteorbrakefluidand
4-2
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)