6
DO-IT-YOURSELF MAINTENANCE
REPLACING HEADLIGHT
BULBS
36
G290B01FC-GAT
Adjustment After Headlight
Assembly Replacement
ing should be checked using an aim-
ing screen as shown in the illustra-
tion. Turn on the headlight switch.
(Low Beam Position)
G260A03A-GAT
Before attempting to replace a head-
light bulb, be sure the switch is turned
to the "OFF" position.
The next paragraph shows how to
reach the headlight bulbs so they
may be changed. Be sure to replace
the burned-out bulb with one of the
same number and wattage rating.
See page 6-38 for the wattage de-
scriptions.
LHD
30mm
(1.18 in.) Vertical line
Horizontal line
W
1. Adjust headlights so that main axis
of light is parallel to center line of
the body and is aligned with point
"P" shown in the illustration.
"P"
H
Cut-off line
2.
Dotted lines in the illustration show
the center of headlights.
L
Ground
line
Specifications:
H
!
G290B01L
"H"
Horizontal center line of headlights
from ground
CAUTION:
Keep the lamps out of contact with
petroleum products, such as oil,
gasoline, etc.
RHD
30mm
(1.18 in.) Vertical line
Horizontal line
W
:
656 mm (26.8 in.)
"P"
"W"
Distance between each headlight
center
H
Cut-off line
:
1,164 mm (47.7 in.)
L
Ground
line
"L"
H
Distance between the headlights
and the wall that the lights are
tested against
G290B01L-D
If the vehicle has had front body
repair and the headlight assembly
has been replaced, the headlight aim-
:
3,000 mm (118 in.).
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)