CONTROLS AND EQUIPMENT
B720A02FC-EAT
B730A01FC-EAT
DEFROSTING/DEFOGGING
Operation Tips
o
To keep dust or unpleasant fumes from
entering the car through the ventilation
system, temporarily set the air intake con-
trol at "Recirculation". Be sure to return the
control to "Fresh" when the irritation has
passed to keep fresh air in the vehicle.
This will help keep the driver alert and
comfortable.
o
o
Air for the heating/cooling system is drawn
in through the grilles just ahead of the
windscreen. Care should be taken that
these are not blocked by leaves, snow, ice
or other obstructions.
To prevent interior fog on the windscreen,
set the air intake control to the fresh air
( ) position and fan speed to the desired
position.
HFC2108
To remove the frost or exterior fog on the
windscreen;
Set the air flow control to the defrost (
position. (The A/C will turn on automati-
cally and "Fresh" mode will be activated.)
Set the temperature control to warm.
Set the fan speed control to position "3" or
"4".
HFC2107
Use the heating/ventilation system to defrost
or defog the windscreen:
o
)
To remove interior fog on the windscreen;
)
o
o
o
Set the air flow control to the defrost (
position. (The A/C will turn on automati-
cally and "Fresh" mode will be activated.)
Set the temperature control to the desired
position.
Set the fan speed control between "1" and
"4" position.
o
o
NOTE:
When the A/C is operated continuously
on the floor-defrost level ( ) or defrost
level ( ), it may cause fog to form on the
exterior windscreen. If this occurs, set the
air flow control to the face level position
( )and fan speed control to the low posi-
tion.
1-
59
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)