3-
8 WHAT TO DO IN AN EMERGENCY
D060D01A-AAT
3. Loosen Wheel Nuts
D060E01A-AAT
4. Put the Jack in Place
D060F02E-AAT
5. Raising the Car
Wrenchbar
Wheel nut wrench
HTB149
HTB4003
HFC4022
The wheel nuts should be loosened
slightlybeforeraisingthecar.Toloosen
the nuts, turn the wheel nut wrench
handle counterclockwise. When doing
this, be sure that the socket is seated
completely over the nut so it cannot
slip off. For maximum leverage, posi-
tion the wrench so the handle is to the
right as shown in the drawing. Then,
while holding the wrench near the end
of the handle, pull up on it with steady
pressure. Do not remove the nuts at
this time. Just loosen them about one-
half turn.
The base of the jack should be placed
on firm, level ground. The jack should
bepositionedasshowninthedrawing.
After inserting a wrench bar into the
wheel nut wrench, install the wrench
bar into the jack as shown in the draw-
ing.Toraisethevehicle,turnthewheel
nut wrench clockwise. As the jack be-
gins to raise the vehicle, double check
that it is properly positioned and will
not slip. If the jack is on soft ground or
sand,placeaboard,brick,flatstoneor
other object under the base of the jack
to keep it from sinking.
Raise the car high enough so that the
fullyinflatedsparetirecanbeinstalled.
To do this, you will need more ground
clearance than is required to remove
the flat tire.
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)