Controls in detail
Useful features
୴
୴
If the indicator lamp 1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or 4) is pressed and re-
leased.
Rolling code programming
Step 9:
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
̈ Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing two steps.
i
If the indicator lamp 1 flashes rapidly
Step 10:
for about 2 seconds and then turns to a Step 8:
constant light, continue with
̈
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
̈
Locate “training” button on the garage
programming steps 8 through 12 as
your garage door opener may be
equipped with the “rolling code”
feature.
door opener motor head unit.
(
2, 3 or 4).
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator’s manual.
Step 11:
̈
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
Step 7:
̈
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
296
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320 CDI, Mercedes-Benz E350, Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)