Operation
Tires and wheels
୴
୴
i
̈ Press button è or ÿ on the mul- ̈ Press the æ button.
tifunction steering wheel repeatedly
until the standard display menu ap-
pears in the multifunction display
Reactivate the TPMS after adjusting
the tire inflation pressure to the infla-
tion pressure recommended for the
vehicle operating condition. Tire pres-
sure should only be adjusted on cold
tires. Observe the recommended tire
inflation pressure on the placard on the
driver’s door B-pillar (୴ page 332).
Some vehicles may have supplemental
tire pressure information for driving at
high speeds (୴ page 338) or for vehicle
loads less than the maximum loaded
vehicle condition. If such information is
provided, it can be found on the inside
of the fuel filler flap.
The following message will appear in
the multifunction display:
Tire pres. monitor
reactivated
(
୴ page 153).
̈
̈
Press the j or k button repeat-
edly until you see the flowing message:
Tire pressure
monitor active
Reactivation possible:
R-button
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system’s
specified range. Afterwards the current
tire inflation pressures are accepted as
reference pressures and then moni-
tored.
Press the reset button.
The following message will appear in
the multifunction display:
Check current
If you wish to cancel activation:
̈
Press the ç button.
tire pressure?
342
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320 CDI, Mercedes-Benz E350, Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)