Practical hints
What to do if …
Problem
Possible cause/consequence
Suggested solution
ú
(USA only)
There is a malfunction in:
̈ Have the vehicle checked as soon as possi-
ble by an authorized Mercedes-Benz Center.
An on-board diagnostic connector is used
by the service station to link the vehicle to
the shop diagnostics system. It allows the
accurate identification of system malfunc-
tions through the readout of diagnostic trou-
ble codes. It is located in the front left area
of the footwell next to the parking brake.
±
(Canada only)
ț
ț
ț
ț
The fuel management system
The ignition system (Gasoline engine)
The emission control system
The yellow engine mal-
function indicator lamp
comes on while driving.
Systems which affect emissions
Such malfunctions may result in excessive
emissions values and may switch the engine
to its limp-home (emergency operation)
mode.
A loss of pressure has been detected in the ̈ Check the fuel cap.
fuel system. The fuel cap may not be closed
properly or the fuel system may be leaky.
If it is not closed properly:
̈
Close the fuel cap.
If it is closed properly:
̈
Have the fuel system checked by an autho-
rized Mercedes-Benz Center.
377
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320 CDI, Mercedes-Benz E350, Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)