Practical hints
What to do if …
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow ABS indicator lamp
comes on while driving.
The ABS has detected a malfunction and has ̈ Continue driving with added caution.
switched off. The BAS and the ESP® are also
switched off (see messages in the multifunc-
tion display).
Wheels may lock during hard braking,
reducing steering capability.
̈
̈
Read and observe messages in the
multifunction display (୴ page 386).
The electrohydraulic brake system is still
functioning normally but without the ABS
available.
Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
If the ABS control unit is malfunctioning, oth-
er systems such as the Parktronic system*,
Distronic*, or the automatic transmission
may also be malfunctioning.
Failure to follow these instructions in-
creases the risk of an accident.
The charging voltage has fallen below
̈ Switch off electrical consumers that
are currently not needed, e.g. seat
heating.
10
volts. The ABS has switched off.
The battery may not be sufficiently charged.
̈
If necessary, have the generator and
battery checked.
When the voltage is above this value
again, the ABS is operational again.
374
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320 CDI, Mercedes-Benz E350, Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)