Operation
Engine compartment
̈
Pull out oil dipstick 1 again after
approximately 3 seconds to obtain ac-
curate reading.
Adding engine oil
!
Only use approved engine oils and oil
filters required for vehicles with
The oil level is correct when it is be-
tween the lower (min) mark 3 and
upper (max) mark 2 of oil dipstick 1.
Maintenance System (U.S. vehicles) or
FSS PLUS (Canada vehicles). For a
listing of approved engine oils and oil
filters, refer to the Factory Approved
Service Products pamphlet in your ve-
hicle literature portfolio, or contact an
authorized Mercedes-Benz Center.
i
The filling quantity between the upper
and lower marks on the oil dipstick is
approximately 2.1 US qt. (2.0 l).
1
2
3
Oil dipstick
Upper (max) mark
Lower (min) mark
Using engine oils and oil filters of spec-
ification other than those expressly re-
quired for the Maintenance System
(U.S. vehicles) or FSS PLUS (Canada
vehicles), or changing of oil and oil filter
at change intervals longer than those
called for by the Maintenance System
(U.S. vehicles) or FSS PLUS (Canada
vehicles) will result in engine damage
not covered by the Mercedes-Benz
Limited Warranty.
̈
If necessary, add engine oil.
To check the engine oil level with the oil
dipstick, do the following:
For adding engine oil, see “Adding en-
gine oil”.
̈
̈
̈
̈
Open the hood (୴ page 319).
Pull out oil dipstick 1.
For more information on engine oil, see
“Fuels, coolants, lubricants etc.”
(
୴ page 484).
Wipe oil dipstick 1 clean.
For more information on messages in the
multifunction display concerning engine
oil, see the “Practical hints” section
Fully insert oil dipstick 1 into the
dipstick guide tube.
(
୴ page 386).
323
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320 CDI, Mercedes-Benz E350, Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)