3.
Unscrew the bolt 1 with an open-ended
Side turn signals
wrench.
5-watt bulb, WY5W
1.
Press against the front edge of the lamp
with the tip of your finger, then push it to the
rear, release the snap connection at the
front and take it off the trim strip.
4.
5.
Turn the cover around the rear securing
point 2 upward while simultaneously pulling
it out of the trim panel at the bottom.
Turn the bulb holder to the left and remove,
refer to arrow.
2.
3.
Turn the bulb holder to the left by 905 and
remove.
Remove and replace the bulb.
Tail lamps
The roadside parking, rear and brake
lamps are LEDs. The backup lamps are
equipped with long-life bulbs. Please contact a
BMW center in case of a malfunction.<
6.
Remove and replace the bulb.
Side marker lamps
5-watt bulb, WY5WST
The bulb can be replaced via a cover at the front
of the wheel well, refer to the description for
turn signal lamp 2.
1.
The bulb holder of the side marker lamp is
located toward the outside of the vehicle
next to the bulb holder of turn signal lamp 2.
1
2
3
4
Turn signals
Roadside parking, tail and brake lamp
Backup lamp
2.
3.
Turn the bulb holder to the left and remove.
Remove and replace the bulb.
Reflector
211
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64, BMW M6 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)