8.
Select "Yes" and press the controller.
Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must have been reset with the
correct tire inflation pressure.
Always use wheels with TPM electronics, oth-
erwise fault-free operation of the system is not
ensured.
Reset the system again after each correc-
tion of the tire inflation pressure and after
every tire or wheel change.<
The message "resetting FTM …" is dis-
played for a few seconds. The warning lamp
in the instrument cluster lights up yellow for
a few seconds.
System limits
TPM cannot announce sudden serious
tire damage caused by external influ-
ences.<
9.
Start to drive.
The initialization finishes during driving
without feedback.
The system does not function properly if it has
not been reset, e.g. a flat tire is reported despite
correct tire inflation pressures.
Indication of a flat tire
The system is inactive and cannot display a flat
tire if a wheel has been mounted without TPM
electronics, or if TPM is temporarily interfered
with by other systems or devices which use the
same radio frequency.
The warning lamp lights up in red. A
message appears on the Control Dis-
play. In addition, an acoustic signal
sounds. There is a flat tire or extensive inflation
pressure loss.
Status display on Control Display
1.
Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering
maneuvers.
The tire and system status is indicated by the
color of the tires.
2.
Identify damaged tire. To do this, check the
tire inflation pressure using the M Mobility
System, refer to Producing tire inflation
pressure on page 214.
TPM takes the fact that the tire pressure
changes during driving into account. A correc-
tion is only required if requested by TPM with
the color.
3.
Repair flat tire with M Mobility System, refer
to page 212, or replace the damaged wheel,
refer to Changing wheels on page 215.
Green
The tire pressure matches the learned set state.
"TPM active" is displayed on the Control Dis-
play.
TPM Tire Pressure Monitor*
One wheel is yellow
The concept
Flat tire or a major drop in inflation pressure in
the indicated tire. A message appears on the
Control Display.
TPM checks the tire inflation pressure in the
four mounted tires. The system reports when
the tire inflation pressure has dropped consid-
erably in one or several tires.
86
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64, BMW M6 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)