Displays after completion of trip
Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can press the CHECK
button repeatedly.
6.
Select a message and press the controller.
The display:
>
>
turns off automatically after a brief period
can be turned off at any time by pressing
the CHECK button again for approx. 2 sec-
onds
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
To exit from the menu immediately:
Select the
arrow and press the controller.
Displaying the urgency of malfunctions
Displaying, setting or changing limit
iDrive, for explanation of principle, refer to
page 16.
1.
2.
Open the start menu.
Open "Navigation".
Without navigation system*: open "Car
Depending on the equipment, the stored Check
Control messages are also displayed with the
following symbols:
Data".
3.
4.
Select "Car Data" and press the controller.
Select "Limit" and press the controller.
No malfunctions detected in the moni-
tored systems.
Malfunctions detected in the monitored
systems. Depending on the malfunction,
supplementary information is shown on
the Control Display.
The symbols also indicate the status of the ser-
vice requirements display, refer to page 71.
75
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64, BMW M6 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)