Radio readiness and ignition off
Sequential Manual Transmission with
Drivelogic
All indicator and warning lamps in the instru-
ment cluster go out.
Remote control in ignition lock or with comfort
access in vehicle, refer to page 37.
1.
2.
3.
Depress brake pedal.
Starting engine
Place selector lever in position N.
Press the Start/Stop button.
Do not run the engine in closed rooms,
otherwise the inhalation of toxic exhaust
gases can cause unconsciousness and death.
The exhaust gases contain carbon monoxide,
an odorless and colorless, but highly toxic gas.
Never leave an unattended vehicle with the
engine running, as such a vehicle represents a
potential safety hazard.
Before leaving the vehicle with the engine run-
ning, shift into neutral* or move the selector
lever into position N and firmly apply the hand-
brake, otherwise the vehicle can begin to roll.<
If the engine does not start, shift back to
the last selector lever position selected,
refer to the instrument cluster display or the
selector lever. Then select position N.
You cannot start off with the hood open.
When the engine is cold, the exhaust system
has a slightly metallic undertone due to the sys-
tem design.<
Switching engine off
Do not allow the engine to warm up by leaving it
running while the vehicle remains stationary.
Instead, drive off at a moderate engine speed.
When leaving the vehicle, always take the
remote control with you.
When parking, firmly apply the handbrake, as
otherwise the vehicle could roll.<
Avoid frequent starting in quick succes-
sion or repeated starting attempts in
which the engine does not start. Otherwise, the
fuel is not burned at all or is burned inade-
quately and there is a danger of overheating and
damage to the catalytic converter.<
Manual transmission*
1.
Press the Start/Stop button with the vehicle
stopped.
2.
3.
4.
Shift into first gear or reverse.
Firmly apply the handbrake.
Remove the remote control from the igni-
tion lock, refer to page 58.
Sequential Manual Transmission with
Drivelogic
1.
2.
3.
Firmly apply the handbrake.
Move selector lever into a drive position.
Manual transmission*
Press the Start/Stop button.
If N is engaged when switching off the
engine, this will be pointed out to you opti-
cally and acoustically.
Remote control in ignition lock or with comfort
access in vehicle, refer to page 37.
1.
2.
Depress brake pedal.
4.
Remove the remote control from the igni-
tion lock, refer to page 58.
Depress the clutch pedal and select the
idling position.
3.
Press the Start/Stop button.
59
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64, BMW M6 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)