Tow-starting
Do not tow-start the vehicle if possible, but
instead start the engine by means of jump start-
ing, refer to page 220. With a catalytic con-
verter, the vehicle should only be tow-started
with the engine cold.
Manual transmission
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
2.
3.
4.
Switch on the ignition, refer to page 58.
Shift into 3rd gear.
Tow-start with the clutch completely
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
5.
6.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
Have the vehicle checked.
Sequential Manual Transmission with
Drivelogic
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
2.
3.
4.
Switch on the ignition, refer to page 58.
Tow-start in selector lever position N.
Move the selector lever into the drive posi-
tion and pull toward + within 2 seconds.
The correct gear will be selected and
engaged automatically.
5.
6.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
Have the vehicle checked.
223
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64, BMW M6 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)