DRIVING YOUR HYUNDAI
2
BEFORE STARTING THE ENGINE
TO START THE ENGINE
3
C020A02A-AAT
C030A01A-GAT
COMBINATION IGNITION
SWITCH
!
Beforeyoustarttheengine,youshould
always:
WARNING:
Alwayswearappropriateshoeswhen
operating yourvehicle.
o If your Hyundai is equipped with a
manual transaxle, place the shift
lever in neutral and depress the
clutch pedal fully.
o If your Hyundai has an automatic
transaxle, place the shift lever in "P"
(park).
o To start the engine, insert the igni-
tion key and turn it to the "START"
position. Release it as soon as the
engine starts. Do not hold the key in
the "START" position for more than
1.
Look around the vehicle to be sure
therearenoflattires,puddlesofoil,
water or other indications of pos-
sible trouble.
Unsuitable shoes (high heels, ski
boots, etc.) may interfere with your
abilitytousethebrakeandaccelera-
torpedal,andtheclutch(ifinstalled).
2.
3.
4.
5.
After entering the car, check to be
sure the parking brake is engaged.
Check that all windows, and lights
are clean.
Check that the interior and exterior
mirrors are clean and in position.
Check your seat, seatback and
headrest to be sure they are in their
proper positions.
15
seconds.
6.
7.
Close all the doors.
NOTE:
Fasten your seat belt and be sure
that all other occupants have fas-
tened theirs.
Turn off all lights and accessories
that are not needed.
Whenyouturntheignitionswitchto
"ON", check that all appropriate
warning lights are operating and
that you have sufficient fuel.
For safety, the engine will not start
if the shift lever is not in "P" or "N"
Position (Automatic Transaxle).
8.
9.
10.Check the operation of warning
lights and all bulbs when key is in
the "ON" position.
gkflgene-2.p65
3
6/18/2007, 11:59 AM
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)