DO-IT-YOURSELFMAINTENANCE
6
REPLACEMENT OF LIGHT
BULBS
27
G290B02GK-GAT
Adjustment After Headlight As-
sembly Replacement
SPECIFICATION:
"H"
Horizontal center line of headlights
from ground:
Low Beam: 690 mm (27.2 in.)
High Beam: 674 mm (26.5 in.)
G260A01MC-AAT
Before attempting to replace a light
bulb, be sure the switch is turned to
the "OFF" position.
The next paragraph shows how to
reach the light bulbs so they may be
changed.Besuretoreplacetheburned-
out bulb with one of the same number
and wattage rating.
Vertical line
30mm
(1.18 in.)
Horizontal line
W
"P"
H
"W"
Distance between each headlight cen-
ter :
Low Beam: 1,336 mm (52.6 in.)
High Beam: 1,098 mm (43.2 in.)
See page 6-36 for the wattage descrip-
tions.
Cut-off line
L
Ground
line
H
!
"L"
G290B01HR-1
CAUTION:
Distance between the headlights and
the wall that the lights are tested
against : 3,000 mm (118 in.)
o Keep the lamps out of contact
with petroleum products, such as
oil, gasoline, etc.
o If you don't have necessary tools,
the correct bulbs and the exper-
tise, consult your authorized
Hyundai dealer.
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
be checked using an aiming screen as
shown in the illustration. Turn on the
headlight switch.
1.
Adjust headlights so that main axis
of light is parallel to center line of
the body and is aligned with point
"P" shown in the illustration.
2.
Dotted lines in the illustration show
the center of headlights.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)