2007 Hyundai Coupe Owners Manual

3
WHAT TO DO IN AN EMERGENCY
10
D060H02A-AAT
7. Re-install Wheel Nuts
D060I01E-GAT
8. Lower  Vehicle  and   Tighten
Nuts
Go around the wheel tightening every
other nut until they are all  tight. Then
double-check each  nut for tightness.
After changing wheels, have a techni-
cian  tighten the  wheel  nuts  to their
proper torque as soon as possible.
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm (65-80 lb.ft)
OGK036604
To reinstall  the wheel, hold  it on the
studs, put the wheel nuts on the studs
and tighten them finger tight. The nuts
should  be  installed  with  their small
diameter ends directed inward. Jiggle
the  tire  to  be  sure  it  is completely
seated, then tighten the nuts as much
as possible with your fingers again.
HGK4014
Lower the car to the ground by turning
the  wheel nut  wrench  counterclock-
wise.  Then  position  the  wrench  as
shown in the drawing and tighten the
wheelnuts.Besurethesocketisseated
completely over the nut. Do not stand
on the wrench handle or use an exten-
sion pipe over the wrench handle.
Product Specification
Categories Hyundai Manuals, Hyundai Coupe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 487 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Coupe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field