3
WHAT TO DO IN AN EMERGENCY
8
D060D02A-AAT
3. Loosen Wheel Nuts
D060E01A-AAT
4. Put the Jack in Place
D060F02E-AAT
5. Raising the Car
Wheel nut
wrench
Wrench bar
HGK4013
OGK036401
D060F01MC
The wheel nuts should be loosened
slightlybeforeraisingthecar.Toloosen
the nuts, turn the wrench handle coun-
terclockwise.Whendoingthis,besure
that the socket is seated completely
over the nut so it cannot slip off. For
maximum leverage, position the
wrench so the handle is to the left as
shown in the drawing. Then, while
holding the wrench near the end of the
handle, push down on it with steady
pressure. Do not remove the nuts at
this time. Just loosen them about one-
half turn.
The base of the jack should be placed
on firm, level ground. The jack should
bepositionedasshowninthedrawing.
After inserting a bar into the wheel nut
wrench, install the bar into the jack as
shown in the drawing. To raise the
vehicle, turn the jack handle clock-
wise. As the jack begins to raise the
vehicle,doublecheckthatitisproperly
positioned and will not slip. If the jack
is on soft ground or sand, place a
board, brick, flat stone or other object
under the base of the jack to keep it
from sinking.
Raise the car high enough so that the
fullyinflatedsparetirecanbeinstalled.
To do this, you will need more ground
clearance than is required to remove
the flat tire.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)