1-
8 FEATURESOFYOURHYUNDAI
SB040G2-E
CENTRAL DOOR LOCKING
(Not all models)
o When the door is unlocked, the
red mark on the switch is visible
and the character "LOCK" on the
switch is visible.
B070B01O-EAT
Armed Stage
o The central door locking is oper-
atedbyturningthekey(withtheft-
alarm system: driver's door and
passenger's door, without theft-
alarmsystem: driver's dooronly)
toward the front or rear of the
vehicle.
o Ifthedoorislocked/unlockedmul-
tiple times in rapid succession
witheitherthevehiclekeyordoor
lock switch, the system may stop
operating temporarily in order to
protect the circuit and prevent
damagetosystemcomponents.
B070B01TB-D
HTB212-D
Park the car and stop the engine. Arm
the system as described below.
Thecentraldoorlockingisoperatedby
pushing the driver's door lock switch
towardthefrontorrearofthevehicle.If
thepassengerandreardoorsareopen
whentheswitchispushed,thedoorwill
remain locked when closed.
1) Remove the ignition key from the
ignition switch.
2) Make sure that the engine bonnet ,
doorsandhatchbackdoorareclosed.
Lockthedoorsusingthetransmitter
of the keyless entry system.
B070A01A-EAT
ANTI-THEFT ALARM SYSTEM
(Not all models)
3)
NOTE:
This system is designed to provide
protectionfromunauthorizedentryinto
the car. This system is operated in
three stages: the first is the "Armed"
stage,thesecondisthe"Alarm"stage,
andthethirdisthe"Disarmed"stage.If
triggered, the system provides an au-
dible alarm with blinking of the turn
signal lights.
o When pushing the switch toward
therear,alldoorsandtailgatewill
unlock.
When pushing the switch toward
the front, all doors and tail gate
will lock.
After completion of the steps above,
the turn signal lights will blink once to
indicate that the system is armed.
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)