2007 Hyundai Getz Owners Manuals

WHAT TO DO IN AN EMERGENCY  3- 9
SD070F1-F
4. Put the Jack in Place
SD070G1-E
5. Raising the Car
!
WARNING:
Do not get under the car when it is
supported by the  jack! The jack is
solely  designed for  wheel chang-
ing and is not  intended to support
the vehicle for other purposes. The
use of purpose designed supports
is necessary  whilst  the vehicle  is
raised and the operator is required
to get underneath.
Wrenchbar
Wheel nut wrench
HTB157
HFC4022
The base of the jack should be placed
on firm, level ground. The jack should
bepositionedasshowninthedrawing.
After inserting  a wrench bar  into the
wheel nut wrench,  install the wrench
bar into the jack as shown in the draw-
ing.Toraisethevehicle,turnthewheel
nut wrench clockwise. As the jack be-
gins to raise the vehicle, double check
that it  is properly positioned  and will
not slip. If the jack is on soft ground or
sand, it may be necessary to  place a
stout piece of timber under the base of
the jack to prevent it from sinking.
Raise the car high enough so that the
fully inflated  spare wheel  can be  in-
stalled.
SD070H1-E
6. Changing Wheels
HTB228
Product Specification
Categories Hyundai Manuals, Hyundai Getz Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 463 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Getz
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field