VEHICLE MAINTENANCE REQUIREMENTS 5- 9
F070B01A-GAT
o Cooling system
F070E05A-AAT
o Automatic Transaxle Fluid
F070G02A-AAT
o Brake fluid
Check the cooling system part, such
as radiator, coolant reservoir, hoses
and connections for leakage and dam-
age. Replace any damaged parts.
The fluid level should be in the "HOT"
range of the dipstick, after the engine
and transaxle are at normal operating
temperature. Check the automatic
transaxle fluid level with the engine
running and the transaxle in neutral,
with the parking brake properly ap-
plied. Use Hyundai Genuine ATF SP-
III, DIAMOND ATF SP-III, SK ATF
SP-III or other brands approved by
Hyundai Motor Co., when adding or
changing fluid.
Check brake fluid level in the brake
fluid reservoir. The level should be
between "MIN" and "MAX" marks on
the side of the reservoir. Use only
hydraulic brake fluid conforming to
DOT 3 or DOT 4.
F070C01A-AAT
o Engine coolant
The coolant should be changed at
the intervals specified in the mainte-
nance schedule.
F070H01B-AAT
o Rear brake drums and linings/
parking brake
Check the rear brake drums and lin-
ings for scoring, burning, leaking fluid,
broken parts, and excessive wear.
Inspect the parking brake system in-
cluding the parking brake lever and
cables. For detailed service proce-
dures, refer to the Shop Manual.
F070D01A-AAT
o Manual transaxle oil
Inspect the manual transaxle oil ac-
cording to the maintenance schedule.
F070F01A-AAT
o Brake hoses and lines
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
NOTE:
If the oil level is low, check for
possible leaks before adding oil.
Do not overfill.
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)