5-
8 VEHICLE MAINTENANCE REQUIREMENTS
F060E01A-AAT
o Timing belt
6ZF060F1-A
o Vacuum, crankcase
ventilation hoses
F060H01A-AAT
o Air cleaner filter
Replace timimg belt and inspect all
associated parts related for damage
and deformation. Replace any dam-
aged parts immediately.
A Genuine Hyundai air cleaner filter is
recommended when filter is replaced.
Inspect the surface of hoses for evi-
dence of heat and/or mechanical dam-
age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Par-
ticular attention should be paid to ex-
amining those hose surfaces nearest
to high heat sources, such as the
exhaust manifold.
Inspect the hose routing to assure
that the hoses do not come in contact
with any heat source, sharp edges or
moving component which might cause
heat damage or mechanical wear.
Inspect all hose connections, such as
clamps and couplings, to make sure
they are secure, and that no leaks are
present. Hoses should be replaced
immediately if there is any evidence of
deterioration or damage.
F060J01A-AAT
o Spark plugs
F060G01A-EAT
o Vapour hose and fuel filler cap
Make sure to install new spark plugs
of the correct heat range.
The vapour hose and fuel filler cap
should be inspected at those intervals
specified in the maintenance sched-
ule. Make sure that a new vapour
hose or fuel filler cap is correctly re-
placed.
F060N01X-GAT
o Valve clearances (1.1 L)
Incorrect valve clearance will not only
result in unsteady engine operation,
but will also cause excessive noise
and reduced engine performance. In-
spect valve clearance and adjust as
required while the engine is hot.
Valve-to-rocker arm clearance
Intake valves ..... 0.2 mm (0.008 in.)
Exhaust valves ... 0.25 mm (0.010 in.)
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)