Controls in detail
Automatic transmission
Shifting from D or R to N
Shifting procedure
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
If you want to select neutral position N
with the transmission being in drive
position D or reverse gear R:
The automatic transmission selects indi-
vidual gears automatically, depending on:
Shift into reverse gear R or park position P only
when the vehicle is stopped.
ț
drive position D (୴ page 201) with
gear ranges (୴ page 205)
̈
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
ț
the selected program mode:
̈
Step firmly on parking brake pedal
(
୴ page 66).
(C/S) (୴ page 206)
or
i When the vehicle needs to be moved with
the engine switched off and the transmission set
to neutral position N (୴ page 201), e.g. in an
automatic car wash, do not depress the parking
brake pedal.
With drive position D selected, you can use
the steering wheel gearshift control
buttons (୴ page 207) to influence trans-
mission shifting by:
(
(
M/C/S) (R 63 AMG only)
୴ page 209)
ț
ț
the position of the accelerator pedal
(
୴ page 203)
Move gear selector lever up to resis-
tance point when in drive position D or
down to resistance point when in
reverse gear R to select neutral
position N.
ț
ț
limiting the gear range
̈
the vehicle speed
changing gears manually
̈
Release the brake pedal.
200
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Bought an R class with no Manual, thanks for the help!!!