Getting started
Driving
Turn signals
The combination switch resets automati-
cally after major steering wheel move-
ment.
̈ Switch on the ignition (୴ page 40).
Do not operate the windshield wipers when
the windshield is dry. Dust that accumulates on
a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs on
a dry windshield. If it is necessary to operate the
windshield wipers in dry weather conditions,
always operate the windshield wipers with
windshield washer fluid (୴ page 62).
!
The combination switch is located on the
left of the steering column.
i If the combination switch is pressed to the
point of resistance and released, the corre-
sponding turn signals flash three times.
Windshield wipers
The combination switch is located on the
left of the steering column.
! If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immediate-
ly.
ț
For safety reasons, stop the vehicle in a safe
location and
Combination switch
ț
remove the SmartKey from the starter
switch
1
2
Turn signals, right
Turn signals, left
or
̈
Press the combination switch in
direction of arrow 1 or 2.
ț
turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in
position 0, same as with SmartKey
removed from starter switch)
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes.
Combination switch
1
Single wipe
before attempting to remove any blockage.
Remove blockage.
Wiping with windshield washer fluid
Switching on windshield wipers
ț
ț
2
Turn the windshield wipers on again.
60
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Bought an R class with no Manual, thanks for the help!!!