Controls in detail
3-zone automatic climate control*
Using driver-side settings for all
temperature zones
Deactivating
Residual heat and ventilation
̈
Press button; (୴ page 234) again.
With the engine switched off, it is possible
to continue to heat or ventilate the interior
for up to 30 minutes. This feature makes
use of the residual heat produced by the
engine.
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
These settings only need to be made once
and the automatic climate control system
will automatically regulate the settings for
all temperature zones quickly and comfort-
ably.
The indicator lamp on the button goes
out.
i If you manually set the temperature, air
volume or air distribution for the passenger side
or the rear passenger compartment when the
MONO setting is active, the MONO setting will
be switched off.
i How long the system will provide heating
depends on
ț
ț
the coolant temperature
the battery voltage
Activating
Regardless of the temperature and air volume
set on the automatic climate control panel, an
interior temperature is aimed at by 72°F (22°C)
and the blower runs on low speed to protect the
vehicle battery.
̈
Adjust the temperature, air volume and
air distribution (୴ page 234).
̈
Press button; (୴ page 234).
The indicator lamp on the button
comes on.
The driver-side settings are used for all
temperature zones.
244
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Bought an R class with no Manual, thanks for the help!!!