Practical hints
Where will I find ...?
Vehicle jack
Warning!
The vehicle jack is located underneath the
storage compartment floor.
G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Operational position
̈
Turn crank handle clockwise until it
engages (operational position).
Storage position
̈ Remove vehicle jack from its storage
compartment (୴ page 472).
Before storing the vehicle jack in its stor-
age compartment:
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface.
̈ Push crank handle up.
ț
The vehicle jack should be fully col-
lapsed.
ț
The handle must be folded in (storage
position).
Make sure the jack arm is fully seated in the
jack take-up bracket. Always lower the
vehicle onto sufficient capacity jackstands
before working under the vehicle.
474
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2007 Mercedes-Benz R350 R500 R320 CDI R63 AMG V251 Owners Manual 5.0 out of 5.0 based on 1 product reviews. Bought an R class with no Manual, thanks for the help!!!