Controls in detail
Useful features
Step 2:
Warning!
G
When programming a garage door opener,
park the vehicle outside the garage.
̈ If you have previously programmed a
signal transmitter button and wish to
retain its programming, proceed to
step 3.
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not run the engine while programming
the integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide
(CO), and inhaling it can cause unconscious-
ness and possible death.
If you are programming the integrated
remote control for the first time,
press and hold the two outer signal
transmitter buttons 2 and 4 and
release them only when indicator
lamp 1 begins to flash after approxi-
mately 20 seconds (do not hold the
button for longer than 30 seconds).
This procedure erases any previous
settings for all three channels and ini-
tializes the memory.
Programming the integrated remote
control
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
Step 1:
̈
Switch on the ignition (୴ page 39).
A garage door that cannot detect an object
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and
begin directly with step 3.
–
signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
338
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Bought an R class with no Manual, thanks for the help!!!