Practical hints
Flat tire
̈
̈
Place jack 3 on firm ground.
Warning!
G
Position jack 3 under the take-up
bracket 2 so that it is always vertical
(plumb-line) as seen from the side,
even if the vehicle is parked on an
incline.
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
ț
Never start the engine when the vehicle
is raised.
ț
Never lie down under the raised vehicle.
1
Wheel wrench
̈
On wheel to be changed, loosen but do
not yet remove the wheel bolts
(approximately one full turn with wheel
wrench 1).
The jack take-up brackets are located
directly behind the front wheel housings
and in front of the rear wheel housings.
̈
̈
Turn crank 4 clockwise until jack 3
is fully seated in take-up bracket 2
and the jack base evenly meets the
ground.
!
Do not position the jack on the body of the
vehicle, as this may cause damage to the
Continue to turn crank 4 until the
wheel is a maximum of 1.2 in (3 cm)
from the ground.
vehicle.
2
3
4
Take-up bracket
Jack
Crank
499
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2007 Mercedes-Benz R350 R500 R320 CDI R63 AMG V251 Owners Manual 5.0 out of 5.0 based on 1 product reviews. Bought an R class with no Manual, thanks for the help!!!