Practical hints
Battery
Step 8 (Disconnecting)
Step 9 (Removing)
̈ Carry out steps 7 through 1 in reverse
order to complete reinstall the battery,
̈
Take out battery.
(
୴ page 511) to (୴ page 508).
Step 10 (Reinstalling)
Step 11 (Reconnecting)
̈
Carry out step 9 (୴ page 512).
̈
If the battery has been removed, carry
out step 9 (୴ page 512) before starting
the connecting procedure.
̈
̈
Open the driver’s door.
Make sure the SmartKey is removed
from the starter switch.
f Positive terminal with cover
g Negative terminal
Vehicles with KEYLESS-GO*:
̈
Disconnect battery negative lead from
̈
Make sure the vehicle’s on-board
negative terminal g.
electronics have status 0.
Make sure the negative lead does not
come into contact with the positive
lead.
Battery, shown removed for illustration
With the driver’s door opened, the
vehicle’s on-board electronics
have status 0, same as SmartKey
removed from the starter
b Battery ventilation hose
h Vent plug
̈
̈
Remove the cover from positive
terminal f.
!
The battery, battery ventilation hose b,
and vent plug h must always be securely
switch (୴ page 41).
installed when the vehicle is in operation.
Disconnect battery positive lead from
positive terminal f.
̈
Carry out step 11 to reconnect the
battery (୴ page 512).
512
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Bought an R class with no Manual, thanks for the help!!!