Practical hints
Replacing bulbs
̈
̈
̈
̈
Turn bulb socket 5 counterclockwise.
Pull bulb socket 5 out of the housing.
Pull the bulb out of bulb socket 5.
Additional turn signal lamps bulbs
Replacing bulbs for rear lamps
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
Before you start to replace a bulb for a rear
lamp, do the following first:
If a malfunction occurs or LEDs fail to
function, the entire turn signal unit must
be replaced. Have the turn signal unit re-
placed by an authorized Mercedes-Benz
Light Truck Center.
Insert the new corner-illuminating front
fog lamp bulb into bulb socket 5.
̈ Turn the combination switch to
position M (୴ page 146).
̈
̈
Insert bulb socket 5 into the housing.
Tail lamp unit
Turn bulb socket 5 clockwise until it
engages.
i To access the tail lamp units, you have to
remove the cover in the corresponding side trim
panel of the cargo compartment.
Front side marker lamp bulbs
̈
Insert corner-illuminating front fog
lamp 1 back into bumper.
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Light Truck Center.
̈
Open the tailgate (୴ page 123).
̈
̈
Fasten retaining screws 4.
Reinsert cover 2 and press it in until it
engages.
̈
Fasten retaining screw(s) 3.
491
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 CDI, Mercedes-Benz R500, Mercedes-Benz R63 AMG |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Bought an R class with no Manual, thanks for the help!!!