>
The indicator lamp flashes after locking:
doors, hood or luggage compartment lid are
not properly closed. Even if you do not close
the alerted area, the system begins to mon-
itor the remaining areas, and the indicator
lamp flashes continuously after approx.
Convenient access*
Convenient access enables you to enter your
vehicle without needing to hold the remote con-
trol in your hand. All you need to do is wear the
remote control close to your body, e.g. in your
jacket pocket. The vehicle detects the corre-
sponding remote control within the immediate
vicinity or in the passenger compartment.
10
seconds. The interior motion sensor and
the tilt alarm sensor are not activated.
>
>
The indicator lamp goes out after unlocking:
your vehicle has not been disturbed while
you were away.
Convenient access supports the following
functions:
>
Unlocking/locking the vehicle
If the indicator lamp flashes after unlocking
until the remote control is inserted in the >
ignition, but for no longer than approx.
Unlocking the luggage compartment lid
separately
5
while you were away.
minutes: your vehicle has been disturbed
>
>
Starting the engine
Convenient closure
Tilt alarm sensor
Functional requirement
The tilt of the vehicle is monitored. The alarm
system reacts, e.g. to attempts to steal a wheel
or tow the vehicle.
>
The vehicle or the luggage compartment lid
can only be locked when the vehicle detects
that the remote control currently in use is
outside of the vehicle.
Interior motion sensor
>
>
The vehicle cannot be locked or unlocked
again until after approx. 2 seconds.
In order for the interior motion sensor to func-
tion properly, the windows and glass roof must
be completely closed*.
The engine can only be started when the
vehicle detects that the remote control cur-
rently in use is inside the vehicle.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following
situations:
Comparison to the standard remote
control
In general, there is no difference between using
convenient access or pressing the buttons on
the remote control to carry out the functions
mentioned above. You should therefore first
familiarize yourself with the instructions on
opening and closing starting on page 28.
>
>
In duplex garages
During transport on car-carrying trains,
boats/ships or on a trailer
>
When animals are to remain in the vehicle
Special features regarding the use of conve-
nient access are described below.
Switching off tilt alarm sensor and
interior motion sensor
If you notice a brief delay while opening or
closing windows or the glass roof, the
system is checking whether a remote control is
inside the vehicle. Please repeat the opening or
closing procedure, if necessary.<
Press the
button on the remote control
again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.
35
Online Edition for Part no. 01 41 0 014 958 - © 02/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)