corrective steering maneuvers may be neces-
sary.
Deactivating MDM
Press the
button on the steering wheel
M Dynamic Mode is switched off every time the
engine is restarted.
again; the MDM indicator lamp in the instru-
ment cluster goes out.
When the M Dynamic Mode is on, stabi-
lizing measures are performed to a limited
degree only. Take action yourself, otherwise
there is a risk of an accident.<
For better control
The indicator lamp goes out briefly after
the engine is started.
If the indicator lamp lights up:
M Dynamic Mode is activated.
To maintain vehicle stability, drive with
the DSC activated and the
M Dynamic Mode deactivated whenever possi-
ble.<
The indicator lamp lights up perma-
nently and the DSC indicator lamp
flashes. M Dynamic Mode is control-
ling the drive and braking forces.
Activating MDM
Press the
button on the steering wheel, refer
Deactivating DSC
to MDrive* on page 48. The MDM indicator
lamp in the instrument cluster lights up if you
previously selected the M Dynamic Mode MDM
in MDrive.
When the ignition is on, you can set the
M Dynamic Mode via MDrive on the Control
Display.
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
Press the DSC OFF button for longer than
approx. 1 second; the indicator lamps for DSC
in the instrument cluster light up. Stabilizing
and drive-output promoting actions are no
longer executed.
2.
3.
Press the controller to open the menu.
Select "M settings" and press the control-
ler.
4.
5.
6.
Select "MDrive" and press the controller.
Select "DSC" and press the controller.
You may find it useful to briefly deactivate DSC
under the following exceptional circumstances:
Select "M Dynamic Mode" and press the
controller.
>
When driving uphill on snow-covered roads,
in slush or on unplowed, snow-covered
roads
>
>
When rocking a stuck vehicle free or start-
ing off in deep snow or on loose ground
When driving with snow chains
To increase vehicle stability, activate DSC again
as soon as possible.
Activating DSC
Press the DSC OFF button again; the indicator
lamps in the instrument cluster go out.
83
Online Edition for Part no. 01 41 0 014 958 - © 02/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)