Fast wiper speed
Press twice or press beyond the resistance
point.
The system switches to normal speed when the
vehicle is stationary.
Intermittent wipe or rain sensor*
If the car is not equipped with a rain sensor, the
intermittent-wipe time is a preset.
6.
Select "Triple turn signal" and press the
controller.
If the car is equipped with a rain sensor, the time
between wipes is controlled automatically and
depends on the intensity of the rainfall. The rain
sensor is mounted on the windshield, directly in
front of the interior rearview mirror.
Triple turn signaling is activated.
The setting is stored for the remote control cur-
rently in use.
Activating intermittent wipe or rain
sensor
Wiper system
Press the button, arrow 3. The LED in the but-
1
2
3
Switching on wipers
ton lights up.
Switching off wipers or brief wipe
Setting speed for intermittent wipe or
sensitivity of the rain sensor
Activating/deactivating intermittent wipe or
rain sensor*
Turn knurled wheel 5 up or down.
4
5
Cleaning windshield and headlamps
Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Deactivating intermittent wipe or rain
sensor
Press the button again, arrow 3.
The LED goes out.
Switching on wipers
Press the lever upward, arrow 1.
Deactivate the rain sensor before enter-
ing an automatic car wash. Failure to do
so could result in damage caused by undesired
wiper activation.<
The lever automatically returns to its initial posi-
tion when released.
Normal wiper speed
Cleaning windshield and headlamps
Press once.
Pull the lever, arrow 4.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.
Washer fluid is sprayed onto the windshield and
the wipers are operated for a short time.
64
Online Edition for Part no. 01 41 0 014 958 - © 02/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)