Folding head restraints down and back
up
Seat and mirror memory
You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
Storing
Folding down:
Press the button, arrow 1.
Folding up:
Pull the head restraint.
Depending on the equipment version, it may be
possible to fold down the outer rear head
restraints as well.
1.
2.
3.
4.
Switch on radio readiness or the ignition,
refer to page 54.
Only fold the head restraints down if no
passengers will be sitting in the rear. Fold
up the head restraints before transporting pas-
sengers in the rear.<
Adjust the seat and exterior mirrors to the
desired positions.
Press the
button.
The LED in the button lights up.
Heated seats*
Press the desired memory button 1 or 2: the
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an accident.<
Press once for each temperature level.
Three LEDs indicate the highest temperature.
Convenience mode
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page 54.
To switch off:
Press button longer.
2.
Briefly press the desired memory button 1
or 2.
If you continue driving within approx.
15
activated at the previously set temperature.
minutes, the seat heating is automatically
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.
43
Online Edition for Part no. 01 41 0 014 958 - © 02/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E92, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)