2009 BMW 6-Series 650i E63 E64 M6 Owners Manual

Adaptive Head Light*
Switching off
Briefly press the lever in the opposite direction
The concept
up to the resistance point, arrow 3.
Adaptive Head Light is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
High-beam assistant*
The concept
This system automatically switches the high
beams on and off. A sensor on the front side of
the inside rearview mirror controls the process.
The assistant makes sure that the high beams
are switched on whenever traffic conditions
permit. This relieves you of the burden of con-
stantly switching back and forth and simulta-
neously provides you with the best possible vis-
ibility. Naturally, you can intervene at any time to
switch the high beams on and off as usual.
Activating Adaptive Head Light
With the ignition switched on, turn the light
switch into position 3, refer to page 97.
To avoid blinding oncoming traffic, the Adaptive
Head Light is not active when driving in reverse
and points toward the passenger side when the
vehicle is stopped.
High beams/
roadside parking lamps
Activating system
1.
Turn the light switch to position 3, refer to
page 97.
2.
With the low beams switched on, briefly
press the turn signal lever in the high-beam
direction.
1
2
3
High beams
Headlamp flasher
Roadside parking lamps
Roadside parking lamps, left or right*
The indicator lamp in the instrument
cluster lights up when the high-beam
assistant is activated. The system
You also enjoy the option of lighting up just one
side of your vehicle when parking.
automatically switches between high beams
and low beams, reacting to oncoming traffic,
vehicles ahead of you, and sufficiently lit areas,
e.g. in built-up zones.
Switching on
After parking the vehicle, press the lever up or
down beyond the resistance point, arrow 3.
The roadside parking lamps drain the bat-
tery. Do not leave them switched on for
long periods of time, otherwise it may no longer
be possible to start the engine.<
Manually switching between high
beams and low beams
If you wish or the situation requires, you can
intervene at any time.
99
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
Product Specification
CategoriesBMW 6-Series Manuals, BMW Manuals
Tags, , ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 270 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field