Functional requirement
Gray
In order to assure the reliable reporting of a flat
tire, the system must have been reset with the
correct tire inflation pressure.
The system cannot detect a flat tire.
Reasons for this can be:
>
>
TPM is being reset
Always use wheels with TPM electronics, oth-
erwise fault-free operation of the system is not
ensured.
Temporary interference due to systems or
devices which use the same radio fre-
quency
Reset the system again after each correc-
tion of the tire inflation pressure and after
every tire or wheel change.<
>
Malfunction
Resetting system
Reset the system again after each correc-
tion of the tire inflation pressure and after
every tire or wheel change.<
System limits
TPM cannot announce sudden serious
tire damage caused by external influ-
ences.<
Resetting finishes during driving, which can be
interrupted at any time. When driving resumes,
resetting is continued automatically.
The system does not function properly if it has
not been reset, e.g. a flat tire is reported despite
correct tire inflation pressures.
iDrive, for operating principle refer to page 16.
1.
Press the
This opens the start menu.
button.
The system is inactive and cannot display a flat
tire if a wheel has been mounted without TPM
electronics, or if TPM is temporarily interfered
with by other systems or devices which use the
same radio frequency.
2.
3.
4.
Press the controller to open the menu.
Select "Settings" and press the controller.
Select "Vehicle / Tires" and press the con-
troller.
Status display on Control Display
5.
Change to upper field if necessary. Turn the
controller until "TPM" is selected and press
the controller.
The tire and system status is indicated by the
color of the tires.
TPM takes the fact that the tire pressure
changes during driving into account. A correc-
tion is only required if requested by TPM with
the color.
Green
The tire pressure matches the learned set state.
"TPM active" appears on the Control Display.
One wheel is yellow
6.
7.
Start the engine, but do not start driving.
Select "Reset" and press the controller.
Flat tire or a major drop in inflation pressure in
the indicated tire. A message appears on the
Control Display.
All wheels are yellow
Flat tire or a major drop in inflation pressure in
several tires. A message appears on the Control
Display.
89
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
Categories | BMW 6-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)